Fandango Clams

Kate Spain has created a magical blend of vibrant colours that I have put together to make a small quilt. When I designed this piece,  I imagined dancing by the sea on a warm Spanish night.


All fabrics are from the Fandango collection by Kate Spain

  • One Fandango charm pack from MODA by Kate Spain
  • 1 1/2 yards ( 27050 11)  Pie Casing 2 and borders
  • 1/2 yard (27046 22)  Pie Casing 1
  • 1 1/2 yards ( 27050 21) for backing – 44″ wide
  • 1/4 yard (27051 21) for peeper border
  • 1/2 yard (27052 23) for binding
  • Wadding (batting) at least 4″ wider and longer than finished quilt top.
  • Neutral thread for piecing
  • 28mm rotary cutter
  • 4″ drunkard path template set
  • Optional – Curve Master foot, wooden roller, tweezers
Fabric Selection


Step 1 –  Rotary cut from charm pack 84 ‘pies’. For the spare, cut 5″ squares from binding fabric

Pie and Pie Casing
Two (2) pies can be cut from one charm square

Step 2 – Rotary Cut from Pie Casing 2 fabric,  59 ‘Pie cases’ and from Pie Casing 1 fabric,  26 ‘Pie Cases’



Step 3 – Select 26 pieces from the ‘Pie’ pile to accompany the ‘Pie Cases 1′. Make 26 blocks. Press the seam inward with wooden roller and then press on right side with dry iron.

My choice of handy tools for curved piecing
Blocks should measure 4 1/2″: finished. I use a roller and dry iron to press the seam. Try not to distort the block.

Step 4 – Match up the remaining ‘Pies’ to the ‘Pie Cases 2′ and sew them together.


Step 5 – Lay the blocks out as per the diagram and then sew the rows diagonally.

For the purposes of this tutorial, I have used a limited number of fabrics to highlight the direction of the blocks.
Press the adjoining block seams open and the rows to one side.

Step 6 – Trim the staggered quilt edges back leaving approximately 1/4″ from the tip of the clam points at the top and bottom of the quilt and the sides as shown below.

Keep the quilt square when cutting back the outer blocks.

Step 7 –  Add the peeper border

  • Cut 4 x 1″ strips WOF. Press in half longways.
  • Measure the quilt across and cut two (2) peepers to that length.
  • Sew them to the quilt and then measure again and attach the last two peeper borders.
I used a longer stitch and sewed 1/8 inch from the edge.

Step 8 – Cut 4 x 4 1/2″ strips from ‘Pie Casing 2′ fabric for borders. Measure across the middle sections of the quilt and add borders.



Step 9 – Layer backing, wadding and quilt top. Baste and quilt as desired.
Step 10 – Cut 5 x 2 1/4″ strips from WOF for binding. Add binding.

Step 11 – Label, photograph and give this quilt to someone you love.

One fabulous Fandango quilt 42″ x 42″. Finished block size 4″ x 4″

Now sit back and enjoy a glass of Sangria on the lawn while you watch the day float by.

Jane Davidson
{Want it, Need it, Quilt it!}

Jane Davidson

Jane Davidson

Jane started quilting over 20 years ago by designing and hand piecing a queen sized quilt. Caught up in study and travel, it was not until 2010 did she rekindle her passion for quilting again.
“I love everything about quilting and the quilting industry. I am so inspired by the enthusiasm and creativity I see everyday”.
A scientist at heart, Jane loves the engineering behind the quilt making process – the planning, the fabric selection, the designing and construction, and of course the quilting. She is always ready to challenge her skills when designing a new block or quilt.
These days you can find Jane in her studio running a professional long-arm quilting service, teaching, designing and planning her next publication.
Jane Davidson

Latest posts by Jane Davidson (see all)