Christmas Ribbons


‘Tis the season to be Jolly, Fa la la la la la la la la. Hi, I am Quiltjane from Want it, Need it, Quilt and I am very excited to be back with a festive recipe – Christmas Ribbons. It is winter in Australia and the perfect time to make Christmas projects and snuggle up near a toasty fire.

Today, I bring you a quilt made with French General’s Fa La La La La collection. I have combined piecing and applique to create a ribbon effect that twines its way throughout the blocks.

1 x Fa la la la Layer Cake

  • 1/2 yd 13586-16
  • 1/2 yd 13587-14
  • 1/2 yd 13582-11 (Binding)
  • 1 1/4 yds 13583-14
  • 1/2 yd 13529-70
  • 3 1/2 yards backing fabric
  • Heat n Bond Light
  • Template plastic

Cutting
From the light coloured yardage and layer cake squares cut:

  • 36 x 7″ squares, cut on the diagonal to yield 72 triangles
  • 18 x 4 1/4″” dark squares and 18 x 4 1/4″ light squares
  • 72 x 3 1/4″ squares
  • 144 x 2 1/2″ x 6 1/4″ rectangles
    Sashing blocks 144 – 2.5″ x 6.25″
    Ribbon pinwheels 72 – 3 1/4″ squares
    Pinwheel Blocks 18 dark and 18 light  – 4 1/4″ blocks
    Makes 12 pinwheels and 12 half pinwheels

    These are the four blocks we will be making.

    From top left: Sashing block, Pinwheel
    Ribbon Pinwheel, and Ribbon block

    Pinwheels – Make 12 Full, 12 Half

    To make the pinwheels:

    • Place a light coloured 4 1/4″ square right sides together with a dark coloured 4 1/4″ square.
    • Sew 1/4″ inch all the way around the border of the squares.
    • Cut once across the diagonal and then without separating the block, cut on the opposite diagonal. Press open the seams.

    This technique yields 4 half square triangle ( HST’s )

    • Trim back evenly to make an unfinished 2 1/2″ square (or sew together first and then trim back to 4 1/2″ unfinished block)
    • Sew four HST’s together to make one pinwheel. Make 12 in total.
    • Sew two HST’s together to make half pinwheels. Make 12 in total.

    Sashing Blocks – Make 30

    • Make 30 sashing blocks by sewing 2 – 6 1/4″ x 2 1/2″ strips together. Keep the remaining 24 single strips for outer sashing.

    Ribbon Blocks – Make 36

    • Cut the 7″ light coloured blocks once on the diagonal to yield 72 triangles.

    • Trace the large ribbon template onto the fusible web ( Heat n Bond light ). Template can be found in ‘Printer Friendly’ version at the bottom of this post.
    • Cut around trace line leaving 1/8″ around curve line. ( Stops the fabric fraying when bonded and cut ).
    • Don’t forget to leave 1/4″ seam allowance as indicated on the template.
    • Press to back of fabric and cut on trace line.
    • Peel off the backing paper and press ribbon appliqué onto a large triangle piece. Make sure to centre the ribbon.
    • With right sides together, sew the two pieces together along the longest side of the triangle. Press seam to one side.

    Trim finished block to 6 1/4″ square. Remember to leave 1/4″ at each tip of the ribbon appliqué when cutting.

    • Using matching thread machine appliqué your ribbon along the curve.

    Ribbon Pinwheel Blocks – Make 13 Full, 8 half, 4 single
    These are made the same way as the larger ribbon blocks.

    • Cut the 3 1/4″ squares on the diagonal to yield 72 triangles.
    • Trace the small ribbon template onto the fusible web (Heat n Bond Light). Don’t cut on the trace line. Leave 1/8″ allowance.
    • Fuse to dark fabric per manufactures instructions. Cut on trace line for arc but leave a 1/4″ seam allowance beyond the template. Make 72.
    Leave a 1/4″ seam allowance.
    • Peel the backing off the fusible web and iron on one triangle, making sure to centre the ribbon appliqué.
    • Place another triangle right sides together and sew along the long side. Trim back to 2 1/2″ squares.
    • Remember to trim the blocks evenly, leaving 1/4″ at each tip of the ribbon.
    • Make 13 blocks as illustrated below
    • Make 8 half blocks and keep 4 single blocks.
    • Using matching thread, machine appliqué the curves of each ribbon

    Putting the quilt top together

    The quilt is sewn in 13 rows as illustrated below.

    • Layout your rows on the floor or design wall to ensure everything is facing the correct way, then sew the blocks together to make a row and then sew the rows together.
    This pattern has a slight variation. The ribbons in the pinwheels are facing upward.

    Finishing the Quilt

    • Layer backing, wadding and quilt top together and quilt as desired. I used an all over feathery pattern with fine matching thread.
    Back of Quilt
    • Cut 6 2 1/4″ strips across the width of the binding fabric and piece the strips together at a 45 degree angle. Attach binding and stand back and admire your festive masterpiece.

    Yield
    One festive quilt 58.5″ x 58.5″

    Garnishes
    Spice it up with tiny yo-yos (suffolk pokes) or Christmas buttons in the centres of the pinwheels and ribbon pinwheels.

    I hope you have enjoyed today’s Christmas recipe. Please upload a photo to my Flickr gallery if you make any of my MBS projects. I would love to see them.

    Jane Davidson
    {Want It, Need It, Quilt!}

    Jane Davidson
    Jane Davidson

    Latest posts by Jane Davidson (see all)