Boho Honeycomb Quilt



Hi!  My name is Erica and I blog over at Kitchen Table Quilting.  I am so excited about Moda's new honeycomb pre-cut and this is a fun, quick way to put them to good use.  There are no Y seams involved and it yields a generously sized lap quilt.


1 Honeycomb Hexagons in Natural
2 Boho Jelly Rolls
2 Yards Moda Bella in Sienna
4.5 Yards Boho Wild Child Rain
2/3 Yard Boho Basic Earth
Batting at least 80"x90"


1. Unroll your jelly rolls and put the matching strips into pairs.  You will need 36 pairs of strips.

 
2.  Leave the strips folded in half and subcut the first strip into pieces 5.75", 8", and 8".  Since you left your strip folded, this will give you two pieces each time you cut.  CUT CAREFULLY.  There is very little wiggle room here.  

3.  Leaving the strip folded again, subcut the second strip in the pair into pieces 10.25", 3.5", and 5.75".  

4.  Separate the strips into two piles.
  • Pile for the inner ring: two 3.5" pieces, 2 of the 5.75" pieces, 2 of the 8" pieces.
  • Pile for the outer ring: two of the 5.75" pieces, two of the 8" pieces, two 10.25" pieces.  


5.  Each honeycomb hexagon will need a set for the inner ring and a set for the outer ring.  Take a hexagon and sew a 3.5" piece to the top and bottom of the hexagon.  Make sure to center your jelly roll piece over the side of the hexagon so a little bit hangs over on each side.

6.  Press and then trim two opposite sides by lining up your ruler with the side of the hexagon.  You only need to trim the two opposite sides because the other sides will be trimmed later.
It should now look like this.
7.  Add two 5.75" pieces to the sides you just trimmed.
8.  Press and trim.
9.  Now add your 8" pieces to the two remaining sides.  
10.  To trim down to a hexagon shape, line the 2.25" inch mark on your ruler with the edge of your hexagon in the center.  Trim around each side.  

11.  Now, using a different print, add two 5.75" pieces to two opposite sides of your hexagon, press, and trim.  

12.  Add the 8" pieces, press, and trim.


13.  And then add the 10.25" pieces, press, and trim just like before by lining up the 2.25" mark on your ruller with the inner ring (the blue print here).  


14. Cut your solid yardage into seven inch x width of fabric strips.  You will need 9 strips, each strip yields 8 equilateral triangles.

15.  To make equilateral triangles, lay a 7 inch strip (folded in half) on your cutting mat.  Line up the 60 degree mark on your ruler with the top of the fabric.


16.  Cut along the edge of the ruler.

17.  Flip your ruler over and line up the 60 degree mark with the bottom of the fabric to make an equilateral triangle.
18.  Sew the triangle to one side of your hexagon by centering the triangle over one side of the hexagon.  A little of the solid fabric should hang over each side.  Once it has been sewn on and pressed, it should line up with the adjacent hexagon side as shown in the photo below.  
You will need 6 total hexagons with 1 triangle, we will call these the "B" hexagon.  It doesn't matter which side you add the triangle to since they are all of the same.  
19.  Take the 30 remaining hexagons and add a triangle to the opposite side.
20.  You will need 24 total  of these "A" hexagons with 2 triangles added, so take the remaining 6 hexagons and we will add a third triangle.

21.  Add a third triangle to make three "C' hexagons.
22.  And a third triangle to make three "D" hexagons.
23.  Arrange your blocks into this layout:
24.  Piece the horizontal rows together.  Do this by taking two hexagons at a time.
And flipping the hexagon on the right up to sew the parallel edge together.  
25. Sew the rows together to finish the quilt top.
26.  Once you have the finished quilt top, two of the sides will need to be trimmed.  Use your ruler and rotary cutter to square up the bottom of the quilt and make this edge straight.
27.  Baste, quilt, and bind as desired.




Finished size: 76"x80"
Erica Jackman
{kitchentablequilting.blogspot.com}

23 comments:

Quiltjane said...

Love Hexies. What a wonderful tutorial. Thank you for sharing.

kim-the-girl said...

That was an awesome tutorial! Great job! Hexies kind of freak me out, but you make it look doable!

trish said...

I am bookmarking this for sure! :0)
Your tutorial is wonderful and I love your quilt.
Thanks so much for showing us how
to make one as well. :0) Trish

Kate C said...

What a great tutorial! Very ingenious, can't wait to try it!

MaterialGirlQuilts said...

Beautiful quilt! Love this line too. Great tutorial.
Amanda

Mountain Home Quilts said...

While I'm not a fan of this line, you make it look great! Love the tutorial!

Cindy Sharp said...

Brilliant!

Karen - Quilts...etc. said...

neat idea - this will be a pattern to come back to.

Jo said...

Great project!! Congrats.

Potpourri said...

Impressive, this is a stunning quilt and a wonderful tutorial.
Thank you!

Amy DeCesare said...

I love this look, and the setting solid is fabulous! Well done!

Tammy said...

Great tutorial and gorgeous quilt. Thank you "sew" much for the tutorial.

Sharon said...

Great tutorial ! I love Hexie's and can't wait to use the Big Ones. Your quilt is just beautiful! Thank you for sharing.

karen said...

Fabulous! Will be ordering fabrics for this today. This is the second of Erica's patterns that I have completely adored.

Rosa said...

Great tutorial and fabulous hexies and fabrics!

Erin @ Sew at Home Mummy said...

Absolutely gorgeous quilt! In love with it :)

himmybee said...

I have wanted a hexie quilt for so long but was way too intimidated to even try it. But just as soon as the new Bonnie & Camille "happy go lucky" jellies are out i will be making this quilt. i think that line will also be sold in hexies maybe i should do a version with print hexies and solid jellies, that would way too cute. i see myself using this tutorial several times! thanks so much!!!

kellytumy said...
This comment has been removed by the author.
kellytumy said...
This comment has been removed by the author.
Annette said...
This comment has been removed by the author.
Annette said...
This comment has been removed by the author.
Annette said...

I'm having a difficult time with this quilt. Your seam allowances and pre-cuts have to be dead on for the larger hexagons to be symmetrical. It is beautiful quilt but it is quite challenging! I'm at the point of adding the triangles and it is proving to be a test.

jennifer first said...

what are you using the 2/3 yd of moda basic earth for? is that what you used to bind it? wanting to make this my next project but with different fabrics