A Simple Old-Fashioned Christmas Tree Skirt



Hello!  I’m liZ from over at Simple Simon and Company and I’m super excited to be here at the Moda Bake Shop today sharing a Christmas Tree Skirt pattern. 

When it comes to Christmas I’m always looking to the past…I love anything traditional, vintage, and old fashioned.  So when I saw the Historical Blenders line by Howard Marcus I knew I would have to use it for a Christmas project and a Christmas Tree Skirt seemed to fit the bill. 

Here’s what I did:

One Fat Quarter Bundle (I used Historical Blenders by Howard Marcus)

The first thing that you will need to do make this Christmas Tree Skirt is to print out the pattern pieces. You can download them here:  An Old Fashioned Christmas Tree Skirt Pattern.

Once you have them cut out and ready to go it’s time to…..

 You will need to cut out 8 of each piece. 
(I used a different, dark fabric piece for each of the large bottom triangles and then I choose 8 different light (or golden) fabric pieces to use for the long skinny triangle pieces.)

Next you will sew piece #2 to piece #3.  (Numbers are marked on each pattern piece.)
You will do this with right sides together and make sure to sew from the top down to the bottom.  (Starting at the small point of the large triangle and sewing down the entire side.)

Now…

 I do this by laying my ruler flush with the edge of my large triangle and cutting off small excess that you will have at the top.

Then…

 Now it’s time to sew piece #1 to pieces #2 and #3 that you just stitched together.
To do this again start at the top (with your light or golden pieces) and sewing with right sides together sew down the entire side of the triangle.  (Like in the photograph below.)

After they are sewn together you will have a little piece at the top that needs to be trimmed so….

Now repeat that process with the other 7 sets of pattern pieces.
Once you are done you are ready to…

Do this with rights sides together. 
When you have all 8 pieces sewn together stop!  Do not close the circle!  (Meaning do not sew piece 1 to piece 8 and you go around the Christmas Tree Skirt.)  You will need an opening to wrap your skirt around the base of your tree.

All you have let to do now is to back and bind your skirt in which ever method you prefer.
(For mine I made my own binding from 2 of the red colored fat quarters and for the backing I pieced together 6 of the remaining fat quarters.  It was easy!)

And you’re done!


One simple, old fashioned Christmas Tree Skirt.

-liZ
{Simple Simon and Company}

Simple Simon and Co.
Simple Simon and Co.

Latest posts by Simple Simon and Co. (see all)