Today on the Bake Shop I will be presenting a bed runner with pockets to store all your e-gadgets, such as iPads, iPhones, Tablets, laptops and Kindles. Using the Japanese themed fabrics of Kasuri, I created this very simple runner, based on a print pattern found in the collection.
The techniques used in this project are a combination of English Paper Piecing, Applique and piecing. English Paper Piecing (EPP) is a wonderful technique to construct complex pieced blocks or blocks with many ‘Y’ seams. The hand piecing makes it a great “On the Go” project to take anywhere.
The Runner for this project is designed for a Queen Size bed.
1 Layer Cake of Kasuri
3 yards Kasuri 32686-20 for background
3/4 yd fabric for binding
2 3/4 yards of backing fabric
Paper or medium weight, non woven interfacing
Sewline Glue stick
Cut from the background fabric:
3 – 18 1/2″ x 18 1/2″ squares Piece A
2 – 24 1/2″ x WOF. Cut into 4 – 12 1/2″ x 24 1/2″ piece D (pockets)
10 – 3 1/2″ x 12 1/2″ rectangles Piece B
From the Layer Cake cut:
54 – Template A
21 – Template B
28 – 3 1/2″ x 3 1/2″ squares Piece C
From the binding fabric cut:
8 – 2 1/2″ x WOF. Set aside 2 strips for the pocket binding.
Make the Stars
Templates A and B can be found in the PDF version of this pattern within this post.
Trace Template A onto your interfacing/paper. Cut out. Make 54.
Trace Template A onto the wrong size of the fabric. Cut out piece leaving a 1/4″ seam allowance around each piece. Make 54.
Press seam allowance over interfacing / paper and glue.
To make each star segment, whipstitch 3 – Piece A right sides together in the following order, 1, 2 and 3. Don’t worry about the little tails at the ends. They will be covered by the appliqué circles.
|Whipstitch pieces with right sides together from point to point using
small stitches and matching thread.
Step 4: Join 3 segments together to form a half star. Repeat.
Step 5: Join both halves of the star together.
Step 6: Starch and Press. Gently remove papers/interfacing.
Make the Circles
Step 7: Trace Template B onto the wrong size of the fabric. Cut out piece leaving a 1/4″ seam allowance around each piece. Make 21.
Step 8: Sew a running stitch at edge of fabric circle. Starch, gather fabric and press. Make sure you smooth out the pleats around the edge of the circle.
Step 9: Gently remove papers/interfacing.
Step 10: Place a dab of glue on the wrong side of three circles and position one in the centre of each star. Applique in place.
Hint: Use glue sparingly. You only need a small drop of applique to hold the piece. Don’t glue too near to the edges that you are stitching.
Making the background blocks
Step 11: Sew Piece C on each end of Piece B. Repeat 5 more times. Make 6 units.
Step 12: Sew units to Piece A. Make 3 finished blocks.
Step 13: Fold the finished block in 4 and press to find centre. Position the star so the widest measurement from point to point of the hexagon shape is aligned top to bottom. Glue the star to the background block. Applique the star onto the background. Glue 6 circles on points of star and appliqué in place. Position the 4 circles on the edge of the block at least 1/4″ in to allow the adjoining sashing to be sewn to the block.
Step 14: Sew 2 C Pieces together. Make 8 units.
Step 15: Sew finished units to Piece B. Make 4 finished blocks.
Assemble the Runner
Step 16: Sew sashing strips to the background blocks.
Step 17: Sew 1 – Piece D to each end of runner.
Quilting the runner
At this stage the runner and pockets are quilted and trimmed.
Step 18: Layer, baste and quilt the pieced runner and 2 x Piece D. (These remaining Piece D are the outside pockets)
Step 19: Trim quilted Pieces D to 12 1/2 x 24 ” and the runner 24″ x 90 1/2″
Sewing the pockets
Step 20: Cut 2 – 2 1/2″ x 24″ strips of binding fabric and make a folded binding.
Step 21: Sew binding to top of quilted Piece D.
Step 22: Lay Piece D, right side up, on edge of runner and baste 1/8″ around 3 sides leaving the binded edge open. Repeat for other side.
Step 23: Determine the width of the e-gadgets that will sit in the pockets. Mark the vertical and horizontal lines on the pocket and sew using a matching thread.
I have an iPad and iPhone to add to my pockets. I slipped the devices in the pocket and left a good margin around each and marked with a chalk pencil. For the iphone, I made the pocket divider shorter so I could easily find the phone. The centre pocket will contain a space for my sketch book.
|If devices are small and you don’t want them to be lost
in the deep pockets, stitch an horizontal line.
Finishing the runner
Step 24: Bind the raw edges of the runner.
Hint: Slow down when sewing through the double layers of the pockets.
Finished size: 24″ x 90″ (Queen Size Runner)
Finished Block size 18″ x 24″
“I love everything about quilting and the quilting industry. I am so inspired by the enthusiasm and creativity I see everyday”.
A scientist at heart, Jane loves the engineering behind the quilt making process – the planning, the fabric selection, the designing and construction, and of course the quilting. She is always ready to challenge her skills when designing a new block or quilt.
These days you can find Jane in her studio, teaching, designing patterns and fabric for Moda, running a professional long-arm quilting service, and planning her next publication.