E-Gadgets Bed Runner


Today on the Bake Shop I will be presenting a bed runner with pockets to store all your e-gadgets, such as iPads, iPhones, Tablets, laptops and Kindles. Using the Japanese themed fabrics of Kasuri, I created this very simple runner, based on a print pattern found in the collection.


The techniques used in this project are a combination of English Paper Piecing, Applique and piecing. English Paper Piecing (EPP) is a wonderful technique to construct complex pieced blocks or blocks with many 'Y' seams. The hand piecing makes it a great "On the Go" project to take anywhere.

The Runner for this project is designed for a Queen Size bed.




1 Layer Cake of Kasuri
3 yards Kasuri 32686-20 for background
3/4 yd fabric for binding
2 3/4 yards of backing fabric
Paper or medium weight, non woven interfacing
Sewline Glue stick
Applique Glue


Cut from the background fabric:

3 - 18 1/2" x 18 1/2" squares Piece A
2 - 24 1/2"  x WOF. Cut into 4 - 12 1/2" x 24 1/2" piece D (pockets)
10 - 3 1/2" x 12 1/2" rectangles Piece B

From the Layer Cake cut:

54 - Template A
21 - Template B
28 - 3 1/2" x 3 1/2" squares Piece C

From the binding fabric cut:
8 - 2 1/2" x WOF. Set aside 2 strips for the pocket binding.

Make the Stars
Templates A and B can be found in the PDF version of this pattern within this post.

Step 1:
Trace Template A onto your interfacing/paper. Cut out. Make 54.
Trace Template A onto the wrong size of the fabric. Cut out piece leaving a 1/4" seam allowance around each piece. Make 54.


Step 2:
Press seam allowance over interfacing / paper and glue.

Step 3:

To make each star segment, whipstitch 3 -  Piece A right sides together in the following order, 1, 2 and 3. Don't worry about the little tails at the ends. They will be covered by the appliqué circles.

Whipstitch pieces with right sides together from point to point using
small stitches and matching thread.

Step 4: Join 3 segments together to form a half star. Repeat.


Step 5: Join both halves of the star together.


Step 6: Starch and Press. Gently remove papers/interfacing.

Make the Circles

Step 7: Trace Template B onto the wrong size of the fabric. Cut out piece leaving a 1/4" seam allowance around each piece. Make 21.


Step 8: Sew a running stitch at edge of fabric circle. Starch, gather fabric and press. Make sure you smooth out the pleats around the edge of the circle.


Step 9: Gently remove papers/interfacing.

Step 10: Place a dab of glue on the wrong side of three circles and position one in the centre of each star.  Applique in place.

Hint: Use glue sparingly. You only need a small drop of applique to hold the piece. Don't glue too near to the edges that you are stitching.


Making the background blocks

Step 11: Sew Piece C on each end of Piece B. Repeat 5 more times. Make 6 units.

Step 12: Sew units to Piece A. Make 3 finished blocks.


Step 13: Fold the finished block in 4 and press to find centre. Position the star so the widest measurement from point to point of the hexagon shape is aligned top to bottom.  Glue the star to the background block. Applique the star onto the background. Glue 6 circles on points of star and appliqué in place. Position the 4 circles on the edge of the block at least 1/4" in to allow the adjoining sashing to be sewn to the block.


Make Sashing

Step 14: Sew 2 C Pieces together. Make 8 units.

Step 15: Sew finished units to Piece B. Make 4 finished blocks.



Assemble the Runner

Step 16: Sew sashing strips to the background blocks.

Step 17: Sew 1 - Piece D to each end of runner.


Quilting the runner

At this stage the runner and pockets are quilted and trimmed.

Step 18: Layer, baste and quilt the pieced runner and 2 x Piece D. (These remaining Piece D are the outside pockets)

Step 19: Trim quilted Pieces D to 12 1/2 x 24 " and the runner 24" x 90 1/2"

Sewing the pockets

Step 20: Cut 2 - 2 1/2" x 24" strips of binding fabric and make a folded binding.

Step 21: Sew binding to top of quilted Piece D.



Step 22: Lay Piece D, right side up, on edge of runner and baste 1/8" around 3 sides leaving the binded edge open. Repeat for other side.



Step 23: Determine the width of the e-gadgets that will sit in the pockets. Mark the vertical and horizontal lines on the pocket and sew using a matching thread.

I have an iPad and iPhone to add to my pockets. I slipped the devices in the pocket and left a good margin around each and marked with a chalk pencil. For the iphone, I made the pocket divider shorter  so I could easily find the phone. The centre pocket will contain a space for my sketch book.




If devices are small and you don't want them to be lost
in the deep pockets, stitch an horizontal line.
Finishing the runner

Step 24: Bind the raw edges of the runner.

Hint: Slow down when sewing through the double layers of the pockets.



Finished size: 24" x 90" (Queen Size Runner)
Finished Block size 18" x 24"

Jane Davidson
{quiltjane.blogspot.com}


12 comments:

Helen said...

Hi, Love the pattern, but where are the templates A & B, can't find them in the pdf file

Unknown said...

Hello,
THAT is really ambitious!
Would like to give it a try, but where are the promised templates?
Still to come?
Would be nice - thank you in advance.

Melissa Corry said...

This is absolutely stunning. Fantastic work Jane!! And the quilting, wow!!

Carol said...

I downloaded the pdf too, but no templates :( Love this pattern - so happy to see something with 'ambitious' rating!

I am Just One Mom said...

Love your work and would love the pattern.
Thank you for sharing your Ambitious bed runner. It is fantastic.

cdlc said...

Beautiful, but no templates anywhere 8(

Quiltjane said...

The templates have now been added to the 'Printer Friendly Version'. They should appear in the next 15 minutes or so.

Luisa said...

This is lovely, I don't do much in the way of paper piecing but I'm keen to give this one a go and I have plenty of fabric to choose from.

Carol said...

Thanks for fixing the pdf! I have the templates now.

IndyNana said...

Love the pattern! Wondering if we don't want to use a layer cake, how much yardage should be purchased?

Quiltjane said...

IndyNana as the stars and3 1/2" setting squares are all scrappy the LC is perfect to provide at least 42 - 10" squares of different patterns and colours. Do you have an e-mail I can contact you on so we can discuss your design concept and then I can work out yardage for you?

klang@ said...

Q trabalho maravilhoso. Você é um capricho em talento.