Quilted Patchwork Pouch


Hi!  I'm Julie from 627handworks.com.  My main love is quilting but I always enjoy making a good pouch.  Zipper bags are fun to make whether you are a seasoned quilter or just started sewing. Is there really such a thing as too many bags?  Never.

I love how the Mini Charms make it easy to put together a scrappy look. I've taken some of my favorite pouch options and combined them into a quilted zipper bag.

Gather up your materials.



1 Mini Charm Pack - Sunnyside by Kate Spain
1 Coordinating Fat Quarter
11" Zipper
(2) 12 x 10 Pieces of Batting


1/2" D-Ring for Pull Tab
Interfacing for lining fabric



PIECING

Break open those Mini Charms.

Choose 36 charms for your quilted exterior, 2 for your zipper stops and 2 for your pull tab.

Lay out the exterior charms. Notice there are no charms on the bottom corners. 


 When piecing little charms for patchwork I like to chain sew. Use a 1/4" seam for piecing.


Don't iron quite yet - wait until you have strip sets (rows of charms) in place.


When have your strip sets sewn together, iron the seams with each row going opposite directions.


This makes it easy for lining up the rows. You won't even need to pin!  The way you've ironed the seams helps lock them together for sewing.


If you feel more comfortable pinning, go for it.  I'm okay using this method for smaller projects that are easier to handle.


Now you should have 2 pieced panels similar to this.


PULL TAB

Make the pull tab by taking 2 of the charms we put aside and sew them together, ironing the seam open.  


Iron lengthwise to mark the center and open it up.   Now fold and iron the edges to the center iron line.


Fold in half again and stitch down the edge of each side.


Optional D-Ring:  Fold your tab in half and stitch the ring in place.


FABRIC STOPS

Take 2 more of the charms we pulled aside. These will be used as fabric stops for the zipper.

Fold in half, iron and open.  Fold and iron a generous 1/4".


QUILTING

Layer your batting under your fabric panel.


The quilting design is up to you!  I stitched straight, diagonal lines through the middle of each charm.

If you do a lot of straight line quilting, chalk markers will line right against your ruler. Makes it kind of nice.


Trim the batting, be careful not to cut any of the charms.


I don't place fabric on the underside and I've never had a problem without it.  You can use muslin or scrap fabric if you want, but this will all be hidden.


Cut two 8.5" x 10.5" rectangles from your fat quarter. This will be your lining.

Optional Interfacing: Iron the interfacing to your fabric.  I like using interfacing because it provides extra stability.


Trim your lining and cut a 2" square from the bottom corners so they resemble the shape of the quilted panels.


ASSEMBLY

You should have something like this:


Take a fabric zipper stop and fold it over the edge of the zipper end.  Sew along the folded edge of the stop to attach.

Open the little tab and cut the zipper down to 1/4" seam. This removes extra material so the corners aren't so bulky.

Attach the other fabric zipper stop - leaving 8" between the two stops.  Trim the extra zipper material from the inside of that stop as well.


Layer:
Quilted exterior right side up
Zipper facing down
     (center the fabric stops so the same amount of fabric sticks out on the right and left)
Lining right side down

Using a zipper foot sew along the top edge of the exterior-zipper-lining sandwich.



Fold the sewn layers off to one side and layer:

Quilted exterior right side up
Zipper facing down
     (the first set of fabrics should be folded down with the other fabrics and out of the way)
Lining right side down

Using a zipper foot sew along the top edge.

Fold each side open. A lining and quilted panel should be wrong sides together on each side.

Top stitch along each side of the zipper and trim the extra fabric off the zipper stops.


Fold the two lining fabrics together - right sides facing.

Fold the two quilted panels together - right sides facing.

Place the pull tab on the inside where the zipper pull will be when the pouch is closed.  If the pull tab is too long for your liking, trim a 1/2" off first.


Make sure your zipper is OPEN!

Line up the top stitching from the two quilted panels and pin in place on each side. This keep your sides lined up. 

Sew using a 1/2" seam down the sides like the image below.  Don't sew the corners. Remember to leave a turning hole!


Once the sides are sewn, separate a corner and fold the seams together.  Sew using 1/2" seam.


Repeat for all corners and you should have something that resembles this.


See that little hole we left in the lining?  Stick your hand in there and start pulling the bag right side out.

This is why we left that zipper open!


Sew your lining hole closed. This is a good spot to sew in a label.


Stuff the lining down inside the pouch and poke out the corners of the bag and the zipper.

Don't use anything sharp or you'll stab right through your fabric creating an ugly little hole.  I may or may not have done this before. And I may or may not have done it more than once.

 

One Awesome Quilted Patchwork Pouch




Ta-da!  Your pouch is complete. 

If you make a patchwork pouch I'd love to see it!

Julie Hirt 


16 comments:

jabbott said...

I love this, im so making this x

KaHolly said...

This tutorial is a keeper! Thanks!

tvbleak said...

A definite keeper and doer. :^D Great tutorial, too. Thanks.

Suzanne said...

It is a breath of fresh air to see such a well written tutorial with clear and bright photos. I will definitely be trying this one out!

Susan R said...

Thank you so much for one of the best tutorials I've read in a long time! I've always wanted to make a bag and with your help I now know I will! Thanks again.

LYDIA'S HOPE said...

I love it! I think my 2 young daughters can do this with me. You did a great job of instructing us and yay for us-we happen to have 2 packages of those mini charms we were wondering what we would do with.

Pierro said...

Rosemary B here:
Yeah, this one is a keeper!
I have made these bags before and your tutorial is very well done.
thanks for the inspiration!!

Karen said...

I took a class making a different type of bag last night, but several of the steps in your tutorial are the same. I so appreciate your great photos that I can use for reference to finish my other bag project. :-) My only suggestion is to add "plastic" to the zipper in the ingredients list if you are going to be cutting it down in size. Thanks for a neat project!

Tealight said...

Brilliant tutorial, really clear and a great looking pouch too!

doris144 said...

It's a very nice pouch !!!

ELNM said...

Fantastic tutorial! I can't wait to try making this.

Mine-rSewFun said...

Directions/photos outstanding...sending you a pic in a bit! :-)

Julie Hirt - 627handworks said...

Thanks for the kind words everyone! Let me know if you have any questions.

I forgot to take a picture of the fabric & zipper stack order for the second side. It's the same process as the first half and just be sure those first fabrics are out of the way.

Amy Morinaka said...

What a lovely patchwork pouch!! Thanks so much for sharing♪

Unknown said...

Hi Julie,

today I sewed my first pouch!
It worked really well until I got to the part where the zipper gets sewn in. Boy oh boy.....
I somehow managed to get that stupid thing in (to be honest: it is the first zipper I sewed!).
The pouch is finished (after some sweat...)- it looks reasonably okay.
But somehow one of the "zipper end pieces made of fabric" totally disappeared in the seam.
I am so exhausted I am definitely leaving it this way - it is the prototype of hopefully more to come where I expect to make a better performance! ;-))
Greetings from Germany!

Debbie Linkous said...

Cute pouch! Can you give the finished diminsions of the bag? Thanks!!