Layer Player Quilt


Welcome to another great tutorial from Quilted Works! One of our fantastic quilt designers, Julie Macfarlane, designed this quick and easy Layer Cake Quilt. She used the new fabric line by American Jane called “Pot Luck.”

  • 1 Layer Cake
  • 1/2 yard fabric for binding
  • 53″ x 60″ piece of batting
  • 2 1/2 yards fabric for quilt back


Select a Layer Cake. Divide the Layer Cake into 21 pairs, making sure that the fabrics coordinate well and create a contrast with each other.

Place two contrasting layer cake pieces right sides together and stitch 1/4″ seam along the two parallel sides. Then, also stitch a seam at 1 1/2″ (from the edge of the fabric) on these same sides.

Now we are going to cut two strips off of each side. First, cut 1 1/4″ from the edge, then move your ruler to cut a second 1 1/4″ strip. It helps to place the stitch line directly on the 1″ mark of your ruler. Do this to both sides, and you will end up with 4 strips.

Using the remaining center piece 5″x10″, stitch again at 1/4″ and 1 1/2″ on the short (5″) sides of the fabric. Trim them the same way as above. You will end up with 4 pieces.

To reassemble the blocks, first sew the short sides onto the center 5″ square, then press.

Next, trim the long strips to 8″ and sew onto the top/bottom of the blocks. Press your finished block.

The finished block size will be 8″ square. You will then begin laying the blocks out with 6 blocks across and 7 rows down. Every other block is rotated 90 degrees. Arrange the blocks to your liking and sew the rows together.

45″ x 52″ Quilt 

We hope you all have a great time making this quilt! For information on kits, please visit our website at www.quiltedworks.com!
Barb Johnson with Julie Macfarlane for Quilted Works

Barb Johnson

Shop Owner at Quilted Works
Your one-stop quilt shop in St. George, Utah.

Latest posts by Barb Johnson (see all)