Hi All! I’m Heather and I blog at here. I hope Santa left you some candy (Moda Candy, that is!) in your stocking, because we’re going to make some pillows today.
To make 2 pillows, you'll need 2 Moda Candy packs, 2 fat quarters background fabric and 2 fat quarters pillow backing fabric.
2 Moda Candy Mini Charm Packs (From Outside In by Malka Dubrawsky)
2 Fat Quarters Background Fabric (Seed Grey)
2 Fat Quarters Print Fabric (one for each pillow back)
2 20" squares of batting (optional)
For each pillow, one 18" zipper (Longer is fine! I used a 20" and trimmed down.)
2 18" pillow forms
Let’s start with
On you design space (wall, floor, table, whatever you have) refer to the picture and arrange your candy pieces into groups of three. Move them around until you’re happy with your arrangement. These will make your pieced “bars.” (See that piece in the top right corner ~ the one that’s the same as the background fabric? If that bugs you, see *** below.)
From the background fabric, cut five 2.5” x 22” wide strips. Sub cut these strips into 2.5” x 6.5” long pieces. You’ll use 13 for this pillow top. Reserve the extra 2 for the Candy Boxes pillow.
Place the background candy bars into place on your design space. Your layout should look like this:
***Take your backing fat quarter of fabric. Cut it down to 18”x 19”. Set aside. See that nice little remaining strip? Cut yourself one extra 2.5” square for the Candy Bar Pillow.
Whew, crisis averted.
Using a ¼” seam allowance, sew the three piece units into candy bars. (Chain piecing makes this go super fast!)
Sew the rows together. Press seams away from the background fabric.
Sew your rows together, matching seams.
Your pillow top should look something like this:
From the background fabric, cut four 2.5” x 22” strips. Sub cut these strips into six 2.5”x 6.5” bars and thirteen 2.5” x 2.5" squares.
Take your candy pieces and background bars and squares and arrange as below (use your reserved two background bars from the Candy Bars Pillow.) Or, if you’re only making the Candy Boxes pillow, cut an additional 2.5” x 22” background strip and sub cut into 2.5” x.6.5” bars.
Uh oh, wait a minute. You’re two candy pieces short of a full candy box. (Or three, if you count that one background piece of candy.)
Okay, nobody panic. Here’s what we’re going to do. Take your second piece of backing fabric. Trim as in *** above, and cut a two additional 2.5" square candy pieces (also cut one from the other backing fabric for more variety.)
Okay, go back to arranging the blocks. You should have five 9 patch blocks with a seed grey center. You should have four alternating grey seed blocks with a patterned center. Sew the nine patch blocks together in rows. Press. Sew the rows together. Press. For the alternating blocks, sew a background square to each side of a patterned square. Press. Sew the rows together. You should now have nice 6.5” blocks.
Sew your blocks together in rows. Press. Sew rows together. Press.Your pillow top should look similar to this:
And here's both pillow tops together.
Decision time. To quilt, or not to quilt. Your choice. I decided to do some simple straight line quilting. I like the added structure and texture it adds. However, if you're in a time crunch or just not feeling it, skip the quilting.
Time to make the pillow backs. We’re making a hidden zippered back with awesome flap/flange back. Complicated title, simple to make.
From your background fabric, for each pillow cut a piece 4” x 18”. Fold in half, length wise, wrong sides together and press. This is your flap/flange.
Take your backing fabric. Cut in half, to make two pieces 9.5” x 18”. (Or, cut into two pieces 6" x 18" and 13" x 18" or wherever you want your flap/flange to be!)
Take your zipper and run a small line of glue from your glue stick on the top side of the zipper. Flip the zipper over on top of the flap fabric. The zipper will now be right side facing the flap with the glued edge meeting the raw edges of the back and flap. The glue stick gives the whole unit a little more stability, a little less “wiggle room.” I use Wonder Clips to hold the layers together.
Your zipper should be face down, aligned at the left.
At you sewing machine, switch to your zipper foot. Sew the length of the zipper. When you get close to the zipper head, leave your needle down and raise your presser foot. Wiggle that zipper head down a bit, past where you've already sewn to get it out of the way. Continue sewing the zipper.
Use your glue stick and glue the remaining top side of the zipper. Lay the top half of the pillow back on the bottom half of the pillow back, right side together, and matching the edge of the zipper with the cut edge of the backing. Sew as above. Press well. You now have a pillow back with hidden zipper and awesome flap/flange! Yeah you!
Finishing: Trim your pillow top and pillow back to 18" square. Lay your pillow top, right side up. Lay your pillow back on top of pillow top, right side down. Make sure your flap/flange is laying down nicely to cover your zipper. Unzip your zipper 3/4 of the way (this is your turning/escape hatch!) Pin all the way around. Stitch around all four sides. Clip the corner of your pillow to reduce bulk. Turn right side out. Press. Stuff with pillow 18" pillow form (it should be nice and snug!)
Zip up your zipper and admire your handiness. Go show the rest of the family how clever you are!
2 Deliciously Easy Pillows!
Thanks for sewing along with me. I’d love for you to stop by my blog and say “hi”!